请确认门头过梁是否需要现浇 ， 如需现浇门头下挂梁浇筑方案建议二边延伸250mm(如下图一所示） 。

Please confirm whether the door lintel needs to be cast-in-place. If it is required to cast the girder under the cast-in-place head it is recommended to extend 250mm on both sides (as shown in Figure 1 below).

REFER DOOR WINDOW SCHEDULE.

请参阅门窗一览表 。

HEIGHT OF OPENINGS IS 2150 WHICH IS BOTTOM OF THE BEAM

SO NO LINTEL REQUIRED.

- ?

开口的高度是2150 ， 是梁的底部

所以没有需要的过梁 。

对门洞口处 ， 铝模考虑下挂梁若上口无梁 ， 则不考虑 ， 下挂宽度同门宽 。 下挂高度=层高-梁高-洞口高-地面做法 。 At the entrance of the door the aluminum mold considers the hanging beam. If there is no beam at the upper end it is not considered and the width of the lower hanging is the same as the width of the door. Under-hang height = layer height - beam height - hole height - ground practice.